http://www.gaofiberoptics.com/marketing/news/ GAO FiberOptics Inc., a member of GAO Group, is an international leading provider of embedded development tools that serve the needs of electronic design engineers throughout the world. Tue, 4 June 2008 19:42:03 GMT FeedEdit http://www.gaofiberoptics.com/gaofiber-news/?p=518 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate XENPAK-10GB-SR transceiver. specially designed for single mode fibers (SMF). It supports a link length of 26 meters on standard FDDI grade MMF. It reaches 300m link length when using 2000MHz/km multi-mode fibers (MMF). Gao Fiberoptics Thu,11 Mar 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=515 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accuratepen style optical visual fault locator (VFL). which is specially designed for field personnel who need an efficient and economical tool for fiber tracking, fiber routing and continuity checking in optical networks. It detects faults in an OTDR dead zone and also finds breaks, poor connections and bending or cracking in fiber optic cables. Gao Fiberoptics Tue,9 Mar 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=512 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate innovative variable optical attenuator. intended for on-line testing. It assists in the maintenance of fiber optic systems as well as digital communication devices such as PHD or SDH or systems using analog modulation such as CATV. The attenuator has an auto-off function and is able to auto restore the attenuating value and steps when it is powered on next time. Gao Fiberoptics Mon,8 Mar 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=508 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate 10G-XENPAK-ER transceiver module. The plug-and-play module has a transmission distance of up to 40km. It integrates a transmitter module and a receiver module into this protocol-independent transceiver which operates at 1550nm wavelength. This transceiver is used in wireless communication devices including cellular telephones, cordless telephone sets, two-way handheld radios, two-way mobile radios and fiber optic systems. Gao Fiberoptics Wed,3 Mar 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=504 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate fiber optic video transceiver module.supporting simultaneous transmission of four-way video and one-way return data over one optical fiber. It uses 10bit/20MHz sampling technology for video digital encoding to ensure the quality of signal transmission. The fiber optic video transceiver module is used in closed-circuit TV (CCTV) monitoring systems operating at a data rate of up to 100kbps. It is available in either stand-alone or rack mount card versions. Gao Fiberoptics Tue,2 Mar 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=501 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate handheld fiber optic power meter.covering a full range of fiber optic measurements. It is commonly used in applications such as communication engineering of LAN, CATV and long-distance fiber optic trunks as well as with active and passive fiber optic devices. This power meter conveniently performs optical measurements for optical power and loss at five calibrated wavelengths. Gao Fiberoptics Mon,1 Mar 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=497 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate fiber optic digital video transceiver module. which uses 10bit/20MHz sampling technology for digital encoding. The digital video transceiver is designed for use in closed-circuit TV (CCTV) and is especially ideal for transmission of video over one-way optical fiber. It is available in either stand-alone or rack mount card versions. The hot-pluggable design and a wide dynamic range of 20dB provide great convenience for the installation, maintenance and operation in fiber optic applications. Gao Fiberoptics Wed,24 Feb 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=494 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate visual fault locator. which is used for fiber identification, wavelength loss testing and fault location of single-mode or multi-mode fibers. This portable, rugged visual fault locator is an excellent tool for the examination of most patch cords and ribbon or bunched pigtails in the installation and maintenance of fiber optic networks, telecommunications and CATV networks. Gao Fiberoptics Tue,23 Feb 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=491 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate handheld optical light source.as an essential instrument for field or laboratory testing of optical communication systems. This optical light source is commonly used in conjunction with an optical power meter for measuring optical loss on single mode or multi mode fiber cable. It is suited for the maintenance of telecommunications and CATV systems and for use in fiber optic test labs. Gao Fiberoptics Sat,20 Feb 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=484 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate Optical Time-Domain Reflectometer (OTDR) . compatible with CATV, ISP and telecommunications fiber networks. It shows the length, attenuation coefficient, connection point, fault points and loss distribution curves of the fiber as well as loss between two points, slice loss and return loss. This palm-sized OTDR is widely used in loss characteristics analysis and fault point location in the manufacture, installation and maintenance of fiber optic networks. Gao Fiberoptics Tue,9 Feb 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=481 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate optical power meter. combined with laser source for fiber optic maintenance. It is a new generation of high performance optical network test meters using the latest laser exploration and processing technology. This handheld optical power meter is used in such applications as the installation and maintenance of fiber optic networks and CATV, LAN and WAN testing, optical network commissioning, and quality assurance and acceptance testing. Gao Fiberoptics Fri,5 Feb 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=477 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate fiber optic power meter .supporting optical identification and fault location for single mode fiber or multimode fiber. This fiber optic power meter performs self-test and self-check for hardware and parameters. It is an ideal solution for the installation, calibration and maintenance of telecommunications and CATV networks. Gao Fiberoptics Wed,3 Feb 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=474 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate handheld fiber optic power meter. tests absolute light power in dBm and tests loss or relative power level in dB in single mode optical cable networks. The cost-effective fiber optic power meter conducts fast and accurate measurements and is an ideal solution for the installation, debugging and maintenance of telecommunication networks, CATV networks and local network projects. Gao Fiberoptics Mon,1 Feb 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=471 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate 14/16 port multi-media converter rack. that can help to eliminate costly network downtime. The converter chassis is specifically designed to accommodate various slide-in media converter modules for multiple segment cross connections. With a slim, low profile chassis and the ability to use a mix of 10Mbps, 100Mbps and Gigabit media converter cards, the integrated converter rack is an ideal solution for connecting evolving networks. It also fits cleanly into any network environment. Gao Fiberoptics Thu,28 Jan 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=467 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate optical time-domain reflectometer (OTDR). using advanced technology to measure the physical characteristics of optical fiber including length, transmission loss and splice loss. The compact OTDR is designed for Fiber-to-the-x (FTTx) network testing and mainly applied in the manufacture, construction and maintenance in optical fiber communication systems. It is also used to locate the faults or breaks of optical fiber. Gao Fiberoptics Tue,26 Jan 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=464 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate telephone cable fault locator. an ideal tool for examining patch cords, ribbons or bunched pigtails. It is suitable for the installation and maintenance of fiber optic networks, telecommunications and CATV networks. This fault locator integrates both TDR and intelligent bridge testing functions into one unit. Gao Fiberoptics Mon,25 Jan 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=461 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate 3Com compatible 1000Base-T SFP transceivers. which are hot-pluggable I/O devices that plug into module sockets. The SFP transceivers are designed for 10 Gigabit per second SONET/SDH, Fibre Channel, gigabit Ethernet, 10 gigabit Ethernet and other applications such as DWDM links. They can be used in conjunction with any GBIC module supported by 3Com devices. The transceivers are fully compatible with original 3Com transceivers. Gao Fiberoptics Fri,22 Jan 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=457 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate visual fault locator. that tests both single mode (SM) and multi-mode (MM) fibers. The 650nm visible laser source has an output power of 1.8mW. The visual fault locator is an ideal tool for engineers and technicians working on fiber optic networks, telecommunication and CATV maintenance. It detects fiber breaks and bend points in fiber optic cables and identifies fiber in ribbon or bundled fiber optic pigtails in installations where identifying a fiber from end to end may be troublesome or time-consuming. Gao Fiberoptics Wed,20 Jan 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=454 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate handheld power meter. which is intended for absolute power and relative loss measurements of fiber optics. It is widely used in telecommunications and CATV maintenance and fiber optics test labs. Gao Fiberoptics Mon,18 Jan 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=451 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurateoptical multi-meter .which can act as an optical power meter and a stable light source or be used as a loss measurement system. It is intended to measure optical loss and check the performance of optical parts. The optical meter is specifically designed for single mode fiber measurement. It has a high definition backlit LCD screen and an AC-DC adaptor, a rechargeable Ni-Cd battery and dry cells as power sources for selection. A compact size and light weight design makes it ideally suited for fieldwork. Gao Fiberoptics Fri,15 Jan 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=447 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate single fiber optic fusion splicer . featuring auto-check of fiber end-face, auto-calculation of the splicing loss, auto-select suitable fusion program and simultaneous X and Y views. Fusion splicing is preferred over mechanical splices for its inherent durability and strength. The splicer is ideal for splicing dispersion shifted, non-zero dispersion shifted, and erbium doped fibers; it is suitable for both single mode (SM) and multi-mode (MM) fiber optic applications. Gao Fiberoptics Tue,12 Jan 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=445 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accuratevisual fault locator .which conducts tests in both single mode and multi-mode fibers. The fault locator is commonly used for applications in telecommunication, LAN, WAN, fiber data links and CATV systems. It is also an ideal solution for examining most patch cords and ribbons or bunched pigtails in the installation and maintenance of fiber optic networks. Gao Fiberoptics Fri, 8 Jan 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=442 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate optical power meter series . with a LW probe and a thin film switch. Utilizing a single-chip microcontroller, this versatile optical power meter series is widely used in the construction, maintenance and measurement of fiber optic cables and optical fiber sensors. The handheld, durable design and simple operation make it suitable for on-the-spot measurements in the field. Gao Fiberoptics Wed, 6 Jan 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=437 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate in-line attenuator . which is ideally suited for use in telecommunication networks, local area networks, fiber optic CATV systems, measuring instruments, optical fiber sensor and optical fiber to household. It is intended to adjust optical power to a desired level. The attenuator is an electronic device that reduces the amplitude or power of a signal without appreciably distorting its waveform. It also has the ability to lower voltage, dissipate power and to improve impedance matching. Gao Fiberoptics Tue, 5 Jan 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=435 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate manual variable optical attenuator. which is commonly deployed in fiber optic systems where the optical power from the source is too high for the equipment in use. It is intended for optical power control and equalization in WDM, FTTx, CATV systems. Gao Fiberoptics Mon, 4 Jan 2010 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=432 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate fiber optic digital video transceiver module . which is designed to support the transmission of one-way video over one optical fiber. The digital video transceiver uses 10-bit/20MHz sampling technology for video digital encoding ensuring the quality of signal transmission. Its hot-pluggable design and a wide dynamic range of 20dB provides for its convenient installation, maintenance and operation. The all-digital fiber optic video transceiver module is commonly used in closed-circuit TV (CCTV) monitoring systems and is also available in either stand-alone or rack mount card versions. Gao Fiberoptics Wed, 30 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=429 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate Cisco compatible transceiver. used for telecommunication and data communication. The affordable 1000BASE-SX SFP is designed to support SNOET, Gigabit Ethernet, Fibre Channel and other communications standards. It is compliant with IEEE802.3z 1000BASE-SX standard and operates on 50μm multi-mode fibers up to 550m and on 62.5μm FDDI-grade multimode fibers up to 220m. This short wavelength transceiver is ideally suited for use in CWDM (Coarse Wave Division Multiplexing) applications and is fully compatible to the original Cisco transceiver. Gao Fiberoptics Tue, 29 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=426 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate optical light source. offering high accuracy and reliability for evaluating a wide range of optical devices and systems including WNM. It is commonly used for such applications as the maintenance of telecommunication networks, CATV systems and fiber optic test labs. This compact optical light source together with 08113 optical power meter is an ideal solution for fiber optic networks. Gao Fiberoptics Fri, 25 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=424 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate mini handheld optical power meter.which is used for absolute power and relative loss measurements of fiber optics. This portable optical power meter in combination with a mini handheld light source (08221) forms a highly valuable testing pair. It is an ideal solution for telecommunication and CATV maintenance and fiber optic test labs. The mini power meter is resistant to dust and water, which makes it suitable for field use. Gao Fiberoptics Wed, 23 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=422 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate optical fiber identifier. which is an essential instrument for the installation and maintenance of optic networks. The compact optical fiber identifier efficiently identifies optical fibers without any damage by detecting the optical signals passing through the fiber utilizing local detection technology, which avoids opening the fiber at a splice point for identification and interruption. Gao Fiberoptics Mon, 21 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=420 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate handheld OTDR. packed with multiple functions. It is able to display the length, attenuation coefficient, connection point, fault point and loss distribution curves of the fiber, as well as, loss between two points, splice loss and return loss. This optical time domain reflectometer supports CATV, ISP and telecommunication fiber networks. It is commonly used for loss analysis and fault location in the manufacturing, installation and maintenance of fiber optic networks and equipment. Gao Fiberoptics Thu, 17 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=416 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate optical multimeter.with a large capacity of 240 records. The handheld optical multimeter is comprised of an intelligent optical power meter module (08121) and a highly stable light source module (08231) which work together to implement loop-around testing and work individually by simple function switching through the on-screen menu. It is anintelligent instrument designed for telecom and CATV maintenance, passive device manufacture and lab testing and research. Gao Fiberoptics Tue, 15 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=409 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate Optical Time-Domain Reflectometer .(OTDR) which is intended for engineers and technicians to measure unit, connection or transmission loss and to locate faults and breaks in optical fibers. The mini-OTDR is commonly used in the manufacture, construction and maintenance of optical networks. Gao Fiberoptics Fri, 11 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=406 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate optical repeater module .intended for WCDMA networks and RoHS compliant products. The RF module monitors and controls optical output power, LD bias current, received optical power, input and output RF signal power of master, received FSK signal power and RF gain through the module’s MCU. Gao Fiberoptics Thu, 10 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=402 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate single-mode to multi-mode converter.operating in full-duplex mode. The modulated fiber optic single and multi-mode converter conducts the transparent conversion between the media of single and multi-mode optical fiber and supports 100m quick Ethernet. It is intended for use in the interlinking and data communication fields of LAN and WAN and for the single and multi-mode conversion. The practical converter is ideal to connect FDDI, fast Ethernet or ATM using 1310nm wavelength for fiber optic transmission. Gao Fiberoptics Tue, 8 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=399 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate innovative variable optical attenuator . which is used as a passive component to reduce the optical power of signals propagating through optical fiber. The attenuator is an invaluable testing instrument intended for on-line testing and maintenance of fiber optic systems as well as digital communication system devices such as PHD or SDH or systems using analog modulation such as CATV. Gao Fiberoptics Mon, 7 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=395 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate handheld cable fault locator. which uses TDR technology and tests for line breaks and short circuit faults in twisted-pair cables, data cables, high frequency cables and coaxial cables. This cable fault locator is ideally suitable for use in HFC systems and applications such as electric wire and cable manufacturing. It has been widely used to locate and reveal cable damage, tie-in dampness and terminal impedance failure. Gao Fiberoptics Thu, 3 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=390 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate optical multimeter. The optical multimeter carries out absolute and relative power tests and optical loss tests and is specifically designed for use in optical telecommunication, CATV and labs. It supports multi-wavelength precision measurement and automatic bi-directional tests. This optical power meter can be customized to meet various requirements. Gao Fiberoptics Tue, 1 Dec 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=385 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate handheld optical light source. as an ideal solution for fiber the testing of fiber optic networks. It has already been widely applied to the maintenance of telecommunication networks, CATV systems, fiber optic test labs, and generic cabling systems (GCS). The compact light source is suitable for simulating various conditions in the manufacture, testing and maintenance of passive optical components. Gao Fiberoptics Fri, 27 Nov 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=382 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate digital optical electric signal level meter .operating over a wide frequency range from 5MHz to 860MHz. This meter supports 1310nm/1550nm dual wavelength and Quadrature Amplitude Modulation (QAM) mode. It performs optical power testing, optical picture viewing, DVB signal measurement and has an additional constellation diagram and EVM function. The practical meter is suitable for hybrid fiber/coax (HFC) network applications. Gao Fiberoptics Wed, 25 Nov 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=359 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate Plug and Play Ethernet media converter.with built-in remote diagnostic capabilities. The media converter is designed to convert data signals between 10/100 Base-Tx and 100 Base-Fx fast Ethernet in order to expand network data transmission distances. It complies with the international IEEE 802.3u standard. The converter can be used as a standalone unit or as a slide-in module for a 19-inch converter rack or in a central wiring closet. Gao Fiberoptics Thu, 19 Nov 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=355 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate visual fault locator. which is utilized in the installation and maintenance of fiber optic networks, telecommunications and CATV networks. The visual fault locator is commonly used for fiber identification and fault location of single-mode or multi-mode fiber as well as for wavelength loss testing. It is also an ideal tool for the examination of all types of patch cords and ribbon or bunched pigtails. Gao Fiberoptics Tue, 17 Nov 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=342 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate cost-effective mini fiber optic power meter. This compact power meter is customized for single mode fiber optic cable networks, CATV networks and local networks. It is also an ideal tool for the debugging and maintenance of telecommunication networks. Gao Fiberoptics Fri, 06 Nov 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=339 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate mini optical light source. which combines high performance with durability in an extremely small-sized package. The light source is specially designed for use in telecommunication and CATV testing and maintenance as well as in fiber optics test labs. It features highly stable and accurate output power and wavelength. Gao Fiberoptics Fri, 06 Nov 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=336 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate handheld optical power meter. intended for absolute optical power measurement as well as relative loss measurement of fiber optics. It features a compact design, wide range of power measurements, highly accurate test results and an automatic self calibration function. The portable meter tests optical power within a wavelength range of 800 to 1600nm. It is an ideal tool for the maintenance and installation of telecommunication and CATV networks. Gao Fiberoptics Fri, 06 Nov 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=332 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurateadaptive fast Ethernet fiber converters. for optical-to-electrical medium conversion. The fiber converter series performs flow control, reduces broadcast packets and ensures convenient network upgrading. They are especially useful in 10/100Mbps fast Ethernet long-distance transmission networks. With applications including switching, storing and forwarding technology, each member of the fiber converter family implements data transmission between optical and electrical network connection media. Gao Fiberoptics Mon, 02 Nov 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=328 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate SFP-GE-L Cisco compatible transceivers. with considerable savings over name-brand products. The hot-swappable I/O devices are designed to support SONET, Gigabit Ethernet, Fibre Channel and other communications standards. These transceivers are plugged into module sockets and connect electrical circuitry with optical or copper networks. Each member of the transceiver family conforms to IEEE802.3z 1000BASE-LX standard. Gao Fiberoptics Thu, 29 Oct 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=327 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate single fiber fusion splicer. The splicer detects the fiber end-face and adjusts parameters automatically. The single fiber fusion splicer is specifically designed for dispersion-shifted fiber (DSF), non-zero dispersion-shifted fiber (NZ-DSF), and erbium-doped fiber (EDF). Gao Fiberoptics Tue, 27 Oct 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=321 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate fiber optic power meter. covering a full range of fiber optic applications. This portable power meter is suitable for use in communication engineering of LAN, CATV and long-distance fiber optic trunk and active and passive fiber optic devices. It conveniently performs optical measurements for optical power and loss at five calibrated wavelengths. The power meter features a portable, durable design, light weight and simple, three-key operation making it ideal for on-the-spot field measurements. Gao Fiberoptics Fri, 23 Oct 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=318 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate fiber optic digital video transceiver module. available in either stand-alone or rack mount card versions. The transceiver is designed for use in closed-circuit TV (CCTV) and traffics monitor systems; it is especially ideal for transmission of video over one-way optical fiber. The hot-pluggable design and a wide dynamic range of 20dB provide great convenience for installation, maintenance and operation in fiber optic applications. Gao Fiberoptics Thu, 22 Oct 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=308 Toronto, Canada – GAO Fiber Optics, a leading supplier of fiber optic equipment, launched its upgraded, highly accurate optical power meter. used for absolute optical power and relative loss measurements of fiber optics. Gao Fiberoptics Fri, 16 Oct 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=306 Toronto, Canada – GAO Fiber Optics has released its portable palm-sized optical time-domain reflectometer (OTDR) designed for Fiber-to-the-x (FTTx) network testing. It uses advanced technology to measure the physical characteristics of optical fiber including length, transmission loss and splice loss and also locates the faults or breaks of optical fiber. The compact OTDR is mainly applied in the manufacture, construction and maintenance in optical fiber communication systems. Gao Fiberoptics Fri, 16 Oct 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=303 USB power source, versatile capabilities make Mini Pad easy to use on the go THIEF RIVER FALLS, Minn.–(Business Wire)– Electronic components distributor Digi-Key Corporation, recognized by design engineers as having the industry`s broadest selection of electronic components available for immediate shipment, announced today it now has stock on the recently-introduced Mini RFID Tracking Pad from 3M. Gao Fiberoptics Fri, 16 Oct 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=301 TGearing for the next IC upturn—and perhaps survival over the long run—special foundry providers are rolling out new strategies and processes. Gao Fiberoptics Fri, 16 Oct 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=295 Toronto, Canada – GAO Fiber Optics,recommends its innovative handheld power meter which is intended for absolute power and relative loss measurements of fiber optics. The economical power meter is widely used in telecommunications and CATV maintenance and fiber optics test labs. It features highly accurate test results, automatic identification of frequencies, and efficient data storage. Gao Fiberoptics Mon, 12 Oct 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=293 Toronto, Canada – GAO Fiber Optics has released its reliable 14 and 16 port integrated converter racks which are designed to accommodate various slide-in media converter modules for multiple segment cross connection. With a slim, low profile chassis and the ability to use a mix of 10Mbps, 100Mbps and Gigabit media converter cards, the integrated converter rack is an ideal solution for connecting evolving networks. Gao Fiberoptics Mon, 12 Oct 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=290 Toronto,Canada – GAO Comm has released this fiber optic power meter, which performs fast and accurate measurements.This well-designed meter is an ideal testing instrument for engineers working on single mode optical cable network installation,debugging and maintenance in telecommunications networks, CATV networks, and local network projects. Featuring a compact size, light weight and low power consumption, the meter ensures easy and efficient performance in taking field measurements. Gao Fiberoptics Mon, 12 Oct 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=288 Toronto, Canada – GAO Fiber Optics has released its manual variable optical attenuator which is intended for optical power control and equalization for WDM systems, FTTx, OADM ,OXC, CATV and measurement instruments. It is commonly deployed in fiber optic systems where the optical power from source is too high for the test equipment in use – the PC board mountable attenuator is an ideal, cost-effective solution.. Gao Fiberoptics Wed, 30 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=286 Toronto, Canada – GAO Fiber Optics is now offering its visual fault locator using 650nm visible laser source that emits a bright beam of laser light into a fiber to allow users to see a break as a glowing or blinking red light. The visual fault locator is intended for examining all kinds of patch cords, ribbons or bunched pigtails in the installation and maintenance of fiber optic networks. It easily isolates high loss points and faults in fiber optic cables and is an ideal solution for applications in telecommunication, LAN, WAN, fiber data links and CATV systems. Gao Fiberoptics Wed, 30 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=284 Toronto, Canada – GAO Fiber Optics has released its visual fault locator, a 650nm Visible Laser Source with an output power of 1.8mW. The visual fault locator is an ideal instrument for detecting broken or serious bending in fiber optic cable and is used in fiber optic networks, telecommunication and CATV maintenance. It is particularly useful for fiber identification in ribbon or bundled fiber optic pigtails in installation where identifying a fiber from end to end may be troublesome or time-consuming. Gao Fiberoptics Wed, 30 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=282 Toronto, Canada – GAO Fiber Optics has announced the availability of its plug-in fixed attenuators, a series of electronic devices that reduce the amplitude, or power, of a signal without appreciably distorting the waveform. The attenuator introduces an in-line fixed loss that can reduce the source power to an acceptable detection level. This attenuator is designed for use in or with telecommunication networks, optical fiber CATV, measuring instruments, local area networks, optical fiber sensors and optical fiber to household systems. It is also deployed to lower voltage, dissipate power and to improve impedance matching. Gao Fiberoptics Wed, 30 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=280 Toronto, Canada – GAO Fiber Optics recommends its telephone cable fault locator using advanced micro-electronics technology. It is an ideal tool for examining patch cords and ribbon or bunched pigtails and is widely used in the installation and maintenance of fiber optics, telecommunications and CATV networks. The fault locator operates in both pulse mode and bridge mode. In pulse mode, the locator tests line breaks while in bridge mode, it locates shorts and bad insulation. Gao Fiberoptics tru, 24 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=277 Toronto, Canada – GAO Fiber Optics recommends its high performance adjustable digital light power attenuator, which is widely used in optical cable construction and maintenance, fiber optic communications and CATV networks. It quickly regulates power with superior linearity, high accuracy and low insertion loss this attenuator adjusts the amplitude or power of an optical signal to a desired level without appreciably distorting its waveform. Gao Fiberoptics Fri, 18 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=274 Toronto, Canada – GAO Fiber Optics offers this digital 4E1/8E1/16E1 point-to-point optical transmitter and receiver. The transceiver employs the latest technologies very-large scale integrated (VLSI) circuitry, digital multiplexer and optical transmission technology. The cost-effective and easily upgradeable transceiver will meet customer needs for high-speed data transmission and TDM integrated access. The optical transceiver series is compliant with telecommunication level operation and has a Mean Time Between Failure (MTBF) of over 100,000 hours. Gao Fiberoptics Fri, 18 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=271 Toronto, Canada – GAO Fiber Optics has released its fiber converter series packed with practical features. The converter series is equipped with multiple interfaces to support RS-485, RS-422 or RS-232 serial connection and multi-mode or single-mode fiber connection. These units support asynchronous, point-to-point operation. This series of fiber converters is commonly used in industrial process control and distributed data acquisition, and is particularly suitable for applications such as power system automation and traffic control. Gao Fiberoptics Fri, 18 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=268 Toronto, Canada – GAO Fiber Optics , a leading supplier of transceivers, has added 10G-XNPK-ER transceiver module that is 100% Foundry Compatible to its product line. The plug-play module integrates a transmitter and a receiver into protocol-independent transceiver which typically operates at 1550nm wavelength. The transceiver can be used in wireless communication devices such as cellular telephones, cordless telephone sets, handheld two-way radios, mobile two-way radios and fiber optical systems. Gao Fiberoptics Fri, 18 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=266 TINA Design Suite is a powerful yet affordable circuit simulator and PCB design software package for analyzing, designing, and real time testing of analog, digital, VHDL, MCU, and mixed electronic circuits and their PCB layouts. You can also analyze SMPS, RF, communication, and optoelectronic circuits; generate and debug MCU code using the integrated flowchart tool; and test microcontroller applications in a mixed circuit environment. A unique feature of TINA is that you can bring your circuit to life with the optional USB controlled TINALab II hardware, which turns your computer into a powerful, multifunctiinstrument. Electrical engineers will find TINA an easy to use, high performance tool, while educators will welcome its unique features for the training environment. Gao Fiberoptics Fri, 18 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=264 Toronto, Canada – GAO Fiber Optics has announced the availability of its RoHS compliant Gigabit Ethernet media converter. The smart Ethernet converter is intended to convert 1000Base-T signals to 1000Base-X fiber signals and vice-versa. It extends the connection distance between two Gigabit Ethernet devices via fiber cable transparently without performance degradation. This Ethernet converter is suitable for use with any equipment compliant with Ethernet standards such as switches and routers which can be connected to this media converter. Gao Fiberoptics Fri, 18 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=261 Toronto, Canada – GAO Fiber Optics recommends its latest optical talk set an all-in-one instrument that combines a digital optical phone and a stabilized light source. The optical talk set is widely used in the installation, testing and maintenance of data, CATV, and other fiber optic telecommunication networks. Gao Fiberoptics Fri, 18 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=257 Toronto, Canada – GAO Fiber Optics has launched its upgraded handheld optical light source as an ideal unit for the installation, construction and maintenance of fiber optics, telecom and CATV networks. Featuring a large backlit LCD display and a user– friendly interface, this easy-to-use light source is an excellent instrument for fieldwork. Gao Fiberoptics Fri, 18 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=254 Toronto, Canada – GAO Fiber Optics has rolled out an advanced optical power multimeter – a combination of a laser source and an optical power meter. The laser source operates at dual wavelengths of 1310nm and 1550nm while the optical power meter module works at wavelengths from 800 to 1600nm. The optical power multimeter carries out absolute and relative power tests and optical loss tests. It is specifically designed for use in optical telecommunication, CATV and labs. It can be tailored according to different customer requirements. Gao Fiberoptics Fri, 18 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=250 Toronto, Canada – GAO Fiber Optics has announced the release of its upgraded handheld optical multi meter. The meter is intended to test a variety of devices using on meter rather than many devices resulting in great convenience and cost savings. It can be used in telecom and CATV maintenance, synthetic cable distribution, passive device manufacturing, lab testing and research. Gao Fiberoptics Fri, 18 Sep 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=148 The laser source assists in determining fiber type and tests continuity as well as optical loss. It is widely used in LAN, WAN, CATV and remote optical networks. Gao Fiberoptics Thurs, 30 Jul 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=136 The power meter is intended for testing LANs, wide-area networks (WANs), metropolitan networks, CATV or long-distance fiber networks. This high performance meter offers various wavelength calibration points and is able to distinguish fiber type, accurately test fiber loss, check fiber continuity, and assist in evaluating the transmission quality of a fiber chain. Gao Fiberoptics Mon., 27 Jul 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=126 This cost-effective meter is intended for installation, calibration and maintenance of telecommunications and CATV networks. The optical power meter features a small size and light weight and conducts multi-mode measurements, which makes it well-suited for field use. Gao Fiberoptics Thurs, 23 Jul 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=113 The 100Mbps optical port for uplink extends the radius of the network. Featuring high performance, easy-to-use and economic, the rack mountable Ethernet switch is an ideal network solution for workgroup users and intelligent residential broadband users. Gao Fiberoptics Tues, 21 Jul 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=109 The hot-swappable 1000Base-LX SFPs are designed to support SONET, Gigabit Ethernet, Fibre Channel and other communications standards. Each member of the transceiver family is compliant with IEEE802.3z 1000BASE-LX standard. Gao Fiberoptics Tues, 21 Jul 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=99 This transceiver is widely used in closed-circuit TV (CCTV) monitoring systems and intelligent transportation systems and ensures proper system operation in complex electromagnetic environments. Gao Fiberoptics Tues, 21 Jul 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=88 Toronto, Canada – GAO Fiber Optics has rolled out a handheld optic power meter which is intended for absolute optic power and relative loss measurements of fiber optics. This power meter is an essential solution utilized in telecom and CATV maintenance as well as fiber optics test labs. Gao Fiberoptics Wed., 15 Jul 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=78 The converter rack is designed to accommodate 14/16 slide-in modules of media converters of various types at a central location for multiple segment cross connection. The converter has a slim low profile chassis and a mix of 10Mbps, 100Mbps and Gigabit media converter cards, GAO Fiber Optics’ 14/16 port converter integrated rack is an ideal solution for connecting modern evolving networks. Gao Fiberoptics Fri, 10 Jul 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=69 The transceivers are hot-swappable input/output devices that plug into an 802.3z standards-compliant GBIC port or slot of a Cisco switch or router in the fiber-optic networks. They are designed to support SONET, Gigabit Ethernet, Fibre Channel, and other communications standards and are used for telecommunications and data communications. Gao Fiberoptics Tues, 07 Jul 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=65 This OTDR uses advanced technology to measure physical characteristics of optical fiber including length, transmission loss and splice loss; it also locates faults or breaks of optical fiber. The rugged OTDR is widely used in the manufacture, construction and maintenance in fiber optic communication systems. Gao Fiberoptics Sun., 05 Jul 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=54 Toronto, Canada – GAO Fiber Optics has released a 10/100/1000Mbps adaptive Gigabit Ethernet fiber converter (MG1000A) which is optimized for 10/100/1000Mbps Gigabit optical Ethernet long-distance transmission networks. Gao Fiberoptics Wed., 01 Jul 2009 17:50:48 GMT http://www.gaofiberoptics.com/gaofiber-news/?p=40 It meets the business needs for high-speed data and TDM integrated access with minimal cost. As a fiber optic multiplexer, or FMO, it is used to transmit 4E1/8E1/16E1 achieving a long distance without the need for repeaters and with superior performance compared to copper media. Gao Fiberoptics Mon., 29 Jun 2009 17:50:48 GMT